Ultrasonic disinfectant tank 3.2 L

1. Fill the tank with water and disinfectant solution.
2. Insert the tools into the basket and select the desired time.
3. Turn on the tub from the switch.
4. The display will show a time of 3 minutes (default ultrasonic time) and the temperature of the water entered.
5. Set the temperature by pressing “Temp. -” and “Temp. +”.
6. Press “Heat” to start heating the water.
7. Press the “Time -” and “Time +” buttons to set the minutes needed to reach the desired temperature (about one hour, each click equals 1 min).
8. When the water has reached the temperature, set the time for disinfection and press “Ultrasonic” to start the process and “Degas” for intermittent degassing mode (6s ON+2s OFF), for deeper cleaning.
9. When the display shows “00:00” the disinfection is finished.

Cleaning:

1. Once the water inside has cooled, empty the tank and use a clean, dry cloth.
2. Wipe the inside and outside of the tub to prepare it for next use.
3. General cleaning: use water at 50C°.
4. Advanced cleaning: Use a few drops of standard (non-acidic) cleaning products or detergent soap.
5. Extended cleaning: to remove rust or other residues, use a specific solution for ultrasonic tanks.
   

• When the display shows “00:00” the disinfection is finished.
• Do not connect the power source before filling or emptying the tank.
• Do not continue heating without water and without supervision.
• Turn off the controls and wait for the water to reach normal temperature before emptying the tank.
• Brush the tools thoroughly under running water before immersing them.