Free 9 Ultrasonic Disinfectant Tank

1. Fill the tub with water (preferably distilled) and add a suitable detergent such as Clean Ferri Cleaning Solution (art. 2582) or Gigasept (art. 2521) in the percentages indicated.
2. Place the tools in the special basket provided, distributing them evenly.
3. For proper cleaning, the instruments must be completely immersed in the liquid.
4. Close the tub with the lid provided.
5. Press the switch and set it to I (on).
   Select the desired cycle based on the desired parameters.
6. Click on “START”. The start of the cycle will be displayed by the flashing reference LED.
7. The end of the cycle is indicated by the fixed START/STOP reference LED light.
8. Lift the lid, being careful of condensation.
9. Turn the lid over and place it near the device.
10. Remove the basket and place it on top of the lid.
11. Proceed with rinsing the disinfected instruments.

Cleaning the tub:

1. Remove any deposits or debris to prevent any blockages in the drain circuit.
2. To reduce limescale build-up, use distilled water.
3. To clean the ultrasonic tank, normal detergents can be used, as long as they do not contain hydrochloric acid or its compounds.

• In case of persistent stains, try specific products for stainless steel.
• Do not use steel wool or anything else that could scratch the device.
• Correct maintenance of the device ensures its good functioning and a sure saving in terms of time and assistance costs.
• Rinse instruments before autoclaving.