Autoclave sterilizer Europa B Evo

1. Select the sterilization program based on the prepared load by pressing the B-SELECT button.
2. Start the cycle by pressing the B-START button. The door will be locked automatically.
   At the end of the sterilization cycle the message “END OF CYCLE” will appear.
3. Unlock the door by pressing the B-DOOR button.
4. In case there is pressure inside the
5. camera button will not unlock.
6. With the door unlocked, pull the door handle and open.
7. Wear personal protective equipment and remove the trays using the key provided.
   

Room cleaning:

1. Periodically clean the chamber by removing any deposits or debris, thus avoiding introducing materials into the exhaust circuit that may create obstructions. For good cleaning, use only demineralized water and the abrasive sponge provided.
   

Cleaning the chamber filter:

1. Pull the filter upwards, being careful not to damage it.
2. Wash it with demineralized water and dry it with a clean, dry cloth.
3. Place it back into its seat, making sure that it protrudes by approximately 15mm.
   

Cleaning the trays and tray holders:

1. Clean with a sponge moistened with demineralized water.
   

Changing the bacteriological filter:

1. Select the “reset counter” item in the “bacteriological filter” submenu.
2. Use only original filters.
3. Proceed with the filter replacement by unscrewing it counterclockwise.
   

Cleaning the door seal:

1. Periodically remove any residue that settles on the circumference of the gasket, using a sponge moistened with demineralized water.
   

• Cleaning must be done in a cold room to avoid burns. Never use solvents, detergents, chemical solutions, descalers or other similar products.
• Maintenance of the instrument must be carried out every 20 cycles or once a week.
• Never overlap tools and bags.
• During the installation phase, leave at least 10 cm of space between the wall and the machine.
• Dry the instruments thoroughly before placing them in the bags and in the autoclave.
• Allow tools to cool completely before using them.