Marathon ASPI-SOL 1200 Silence Vacuum Cleaner

1. Snap the extractor arm into the upper body.
2. Connect the vacuum cleaner cord to the power outlet.
3. Position the jug and arm in the direction of the work.
4. Operate from the ON/OFF button.
5. Choose the suction level according to the job using the arrows pointing down or up.
   

Wet filter replacement:

1. Remove the arm.
2. Open the top of the machine body.
3. Remove the wet filter and proceed with the replacement.
4. Close the top of the machine body.
   

ULPA filter replacement:

1. Remove the arm.
2. Open the top of the machine body.
3. Remove the wet filter and ULPA filter.
4. Proceed with the replacement of the ULPA filter.
5. Reinsert the wet filter and close the top of the machine body.
   

Carbon filter replacement:

1. Remove the arm.
2. Open the top of the machine body.
3. Remove the wet filter, ULPA filter and carbon filter.
4. Proceed with the replacement of the carbon filter.
5. Re-insert the ULPA filter and the wet filter.
6. Close the top of the machine body.
   

• To avoid the risk of damage, do not operate the vacuum cleaner without filters in place.
• Do not vacuum water, liquids or wet dirt.
• Do not vacuum flammable or combustible liquids or gases and do not vacuum in areas where such substances are stored.
• Do not vacuum heavy, hard or sharp-edged objects as they may cause blockage and damage the appliance.